Commercial Building Inspector In Columbia, Maryland

Your Commercial Building Inspector In Columbia, Maryland

Are you a Columbia, Maryland, home or business owner? Are you getting ready to sell, rent, lease, or buy another property? Then, you'll need a commercial building inspector in Columbia, Maryland, to ensure all your building is in top-notch condition. At Delmarva Building Inspections, we check every aspect of a structure. No one wants to have buyer's remorse, especially when it comes to the purchase of a building. So, we are ready to meet the demand if you need a licensed building inspector in Columbia, Maryland.

Licensed, Certified Residential & COMMERCIAL
Building INSPECTORS #33884

Just A Few Things Your Commercial Building Inspection Will Cover

What can property owners expect from a building inspection in Columbia, Maryland? Unlike home inspections, commercial inspections get tailored to the requirements of the buyers, sellers, and lessees. In most cases, your building inspector will check for the following:

  • Water damage: Scan roofs that leak, broken pipes, or flooding
  • HVAC damage: System check for damage to ensure it is cooling and heating correctly. 
  • Problems with electricity: Check old wiring, overloaded circuits, and power outages.
  • Pests: Look for pest infestations such as rodents, termites, and bed bugs, among other pests.
  • Structural problems: Review for settling, problems with the foundation, and the wear and tear of building materials.
  • Fire hazards: Ensure the storing of flammable materials incorrectly, electrical problems, and other unsafe fire hazards.
  • Plumbing System: Look for any issues, including your water heater and fixtures.

These problems can make a commercial building unsafe for occupancy. Therefore, we advise building owners and managers to regularly check for issues such as cracks, leaks, mold, and signs of pests.

Licensed, Certified Commercial Building Inspectors in Columbia, Maryland

  1. Maryland State Contractor License #79009
  2. Delaware State Contractor License #2016600660
  3. Maryland State Residential Home Inspector #33884 
  4. Delaware State Residential Home Inspector #H4-0010181
  5. IICRC Water Damage Restoration Technician
  6. Certified Supervisor For EPA AHERA (Asbestos Abatement)
  7. Maryland Certified Mold Inspector
  8. Delaware Certified Mold Inspector 
  9. OSHA HAZWOPER #183328 
  10. FAA Part 107 Certificate
  11. FAA Certified Unmanned Aerial System Pilot) 10387655 - 20220831-00677
  12. PESTICIDE APPLICATOR DE 22-253
  13. InterNACHI Certified Professional Building Inspector (CPI), NACHI 61092825, 
  14. Certified Private Pilot with Instrument Rating 
  15. EPA LEAD SAFE FIRM NAT-F172/84-2 

Your Building Inspector Takes A Thorough Look At The Building's Condition

  • Exterior: Look over the condition of the roof, walls, foundation, windows, and doors outside the building.
  • Interior: Survey the walls, ceilings, floors, electrical and plumbing systems, heating and cooling systems, and appliances inside the house.
  • Structural: Check the building's structural parts, like beams, columns, and foundations, to make sure they are safe and sound.
  • Fire safety systems: Fire alarms and sprinkler systems, and other safety systems, like smoke detectors, must be checked to ensure they are working properly.

Testing for
Radon

Radon is a naturally occurring radioactive gas produced when uranium breaks down. This inert gas doesn't taste, look, or smell like anything, and it could get in through cracks in the building's foundation or other holes. Through cracks in the ground with other soil gases is another possible way that radon can seep into your home too. Learn More

Wood-Destroying
Pests

We look at the parts of a building that are easy to get to and tell us important things about its condition. The inspection report will say whether or not your building has organisms or pests that hurt wood. Learn More

Water Quality
Testing

Pesticides, lead, mercury, atrazine, and arsenic are some of the unwanted substances that can be found in the water that may run through your building. Most of the time, our specialists already know about these toxins, especially if they are a problem in your area. Learn More

Sewer Line
Inspection

A sewer scope camera is used to look at the lateral sewage pipe that connects your home to the city's main line or a septic tank. This is usually done at or near your home's foundation. Through sewage camera inspections, problems with the lateral sewer system can be found and fixed. Learn More

Drone
Inspection

Drones are being used more and more to scan roofs quickly, safely, and accurately while cutting down on the cost of calculating or measuring the roofs. This lets you get useful information that, depending on your business, you can use in many different ways. Learn More

Lead Hazard
Evaluation

On request, an on-site inspection, risk assessment, and clearance inspection are done to find out if a public building has lead-based paint or lead hazards and how many of them there are. Learn More

Mold
Inspection

Do you plan on purchasing, selling, or renting a new commercial structure? Prioritizing a mold inspection is essential when evaluating a building. Many times mold is not seen until it is detected by a professional. Learn More

Thermal
Imaging

With the introduction of high-resolution cameras capable of detecting even the slightest temperature variations and complemented by real-time image analysis software, thermal imaging has become an indispensable tool in numerous industries. Learn More

Licenses & Certifications

A Complete Report Is Provided Shortly After The Inspection 

Usually, the inspector will write up a report that lists any issues with the building and makes suggestions for how to fix or improve it. A building inspection may be required for a number of reasons, such as when buying or selling a property. Additionally, before making improvements or renovations, ensure all building codes and rules get followed. A licensed, qualified building inspector in Columbia, Maryland, with training and experience in building construction and safety, should manage the building inspections.

Is Mold Common in Columbia, Maryland Business Buildings?

Mold is another thing that worries most property owners. Yes, mold is a common problem in commercial buildings in Columbia, Maryland. A building inspector will give a report listing any potential problems, including mold. Mold can make people ill, damage buildings, and create unpleasant odors. So, building owners and managers need to check for mold regularly and take care of any problems immediately to stop it from spreading and doing more damage. Getting rid of mold usually means: 

  • Removing the source of the moisture
  • Cleaning the damaged areas
  • Increasing airflow to stop future growth

Asbestos Is Another Common Issue in Columbia, Maryland's Old Commercial Buildings

In the past, asbestos was often used in building materials, including commercial buildings. This means that older commercial buildings in Columbia, Maryland, may have asbestos. If you breathe in asbestos fibers, it could lead to lung cancer or mesothelioma, which are both very dangerous diseases. So, building owners and managers need to check their buildings for asbestos and fix any problems to protect people's health.  But, most of the time, it's best to leave asbestos alone and hire a professional to remove it.

Lead Paint Was The Go-To Paint Used Before 1978 

Yes, lead-based paint was the go-to paint for many years in Columbia, Maryland, and there are still old buildings that have it. Unfortunately, lead-based paint is bad for your health, especially for young children, who can get sick if they digest the dust or paint chips that contain lead. Also, a building built before 1978 might have lead-based paint. In 1978 lead-based paint was banned for use in homes and buildings.

Business owners and managers should check for lead-based paint and fix any problems they find to protect the health of the people working or living in the building.  Lead-based paint remediation usually involves encapsulating or removing the paint, which can only be done by a trained and certified professional. Delmarva Building Inspections can help you if you need a commercial building inspector in Columbia, Maryland.

How Are Drones Being Used To Inspect Buildings?

The last thing that comes to mind when we think about commercial building inspections is technology. But technology has changed every part of life, including commercial inspections. For example, we use high-tech drones when inspecting a building. Drones get used to inspect the following:

  • Taking a clear, detailed look at the roof
  • Checking places that are hard to get to or dangerous
  • Getting high-resolution photos and videos from the air
  • Putting buildings into 3D models 
  • Taking measurements and checking structures

Using a drone to check the roof of a building is the easiest way to inspect it. This makes it possible to do a quick inspection without ladders or scaffolding. The drone can also easily get to places that are hard to get to and take high-resolution photos and videos for detailed analysis.

When You Look at a Roof, Some Common Problems You Might Find Are:

  • Shingles or tiles that are missing or broken
  • Damage to the structure or sagging 
  • Damage to the structure or sagging 
  • Rust or deterioration on metal roof parts.

Delmarva Building Inspections is ready to meet the high demand for your building inspection. Please check out our certifications and licenses. We have licensed contractors in Delaware and Maryland and licensed commercial building inspectors in both states. So call today, and you'll always get the service you deserve. 

How Are Drones Being Used To Inspect Buildings?

The last thing that comes to mind when we think about commercial building inspections is technology. But technology has changed every part of life, including commercial inspections. For example, we use high-tech drones when inspecting a building. Drones are used to inspect the following:

  • Taking a clear, detailed look at the roof
  • Checking places that are hard to get to or dangerous
  • Getting high-resolution photos and videos from the air
  • Putting buildings into 3D models 
  • Taking measurements and checking structures

Using a drone to check the roof of a building is the easiest way to inspect it. This makes it possible to do a quick inspection without ladders or scaffolding. The drone can also easily get to places that are hard to get to and take high-resolution photos and videos for detailed analysis.

When You Look at a Roof, Some Common Problems You Might Find Are:

  • Shingles or tiles that are missing or broken
  • Damage to the structure or sagging 
  • Rust or deterioration on metal roof parts

Delmarva Building Inspections is ready to meet the high demand for your building inspection. Please check out our certifications and licenses. We have licensed contractors in Delaware and Maryland and licensed commercial building inspectors in both states. So call today, and you'll always get the service you deserve. 

Call Today!
We'll Exceed Your Expectations!

Licensed, Certified Residential & COMMERCIAL Building INSPECTORS